    |
Laboratory & Pharmacy Freezer -29°C to -18°C – 23.1 cu ft (654 L) Upright w/ 1 Solid Door, Cycle Defrost . |
- Key on/off switch for secure operation.
- LCD temperature readout - highly visible and accurate displaying °C scale in tenths of a degree. Easy to read angled control panel.
- Cabinet walls are made of 22 gauge cold roll steel (exterior) and 26 gauge galvanized steel (interior) for lasting durability. Both surfaces finished with high luster baked-enamel coatings. Insulation - 2.37in (6cm) foamed-in-place urethane (CFC-Free) for more efficient temperature control.
- 2" solid urethane foam insulated doors with sturdy cam-lift hinges with "lock-open" feature for "hands-free" access to stored material(s).
- Heavy duty gasketing for maximum cold retention and minimum frost build-up.
- Adjustable cantilever shelves with 1in increments, no loose hardware or clips required. Configure the cabinet to fit your requirements. Unique cantilever shelves can be mounted to provide gravity feed back to front. Epoxy coated wire.
- 6in (15.2 cm) adjustable legs that allow you to easily "level" your cabinet and make accommodating height adjustments.
- Adjustable thermostat.
- Expansion valve refrigerant control.
- Automatic electric defrost.
- Optional alarm system that features audio and visual signal for high temperature conditions, push button test, audio silencer, and battery backup.
- Optional temperature recorder offers a 6in dial, 7-day clock with stylus pen.
- CFC-free refrigerant and insulation.
- UL listed.
|
- Temperature Range: -18°C to -29°C
- Interior Dimensions (W x D x H): 22in x 28in x 60in (56cm x 71cm x 152cm)
- Exterior Dimensions (W x D x H): 26in x 33.5in x 84.5in (66cm x 85cm x 215cm)
- Optional accessories:
- Temperature alarm.
- 7-day recorder.
- Interior finish: Anodized aluminum.
- Doors: Single solid s/s - w/key lock.
- Casters: Heavy duty swivel.
- Shelves: 3 epoxy coated adjustable
- Interior Lighting: One 40W - door activated.
- Insulation: Urethane - wall 2" foam.
- Refrigerant: R-404A.
- Compressor: 1/2 hp.
- Condenser: Fin and tube.
- Air Circulation: Forced air.
- Refrigerant Control: Expansion valve.
- Thermostat: Adjustable with digital display.
- Defrost: Cycle, automatic.
- Evaporator: Fin and tube, forced air.
- Electrical Requirements:
- 115 volts, 60 hertz, 1 phase (Domestic)/ 230 volts, 50 hertz, 1 phase (Export)
- Supply Plug: 5-20 NEMA
- Running Amps/Breaker: 10/20 Amp circuit required.
- CSA approved.
- Shipping weight: 377 lbs (171 kg).
- Warranty: (in US) initial 2 years on parts and labor; additional 3 years on compressor only (labor not included).
|
|
|
|