    |
Explosion Proof Freezer -30°C to -18°C – 30 cu ft (849 L) Upright w/ 1 Solid Door, Manual Defrost. |
- Cabinet walls made of 22-gauge cold roll steel (exterior) and 26-gauge galvanized steel (interior) for lasting durability. Both surfaces finished with high-luster, baked-enamel coatings. Insulation is 2.37in (6 cm) thick foamed-in-place urethane (CFC-free) for more efficient temperature control.
- 2in thick solid urethane foam insulated doors with sturdy cam-lift hinges with "lock-open" feature for hands-free access to stored material.
- Cantilever shelves are adjustable in 1in increments with no loose hardware or clips required. Shelves can be mounted to provide gravity feedback to front. Epoxy coated wire.
- 6in (15.2 cm) adjustable legs accommodate height adjustments.
- CFC-free-refrigerant and insulation.
- Fin & tube forced air condenser/evaporator.
- Expansion Valve Refrigerant Control.
- Adjustable thermostat.
- Manual defrost thaws coils whenever the compressor isn't running. No heater or timer necessary.
- UL listed.
|
- Temperature Range: -18°C to -30°C / -22°F
- Interior Dimensions (W x D x H): 32in x 22.5in x 65in (82cm x 57cm x 125cm)
- Exterior Dimensions (W x D x H): 35.5in x 35in x 82in (90cm x 89cm x 209cm)
- Top Mounted hydraulic explosion-proof thermostat
- Doors: Single solid with key lock
- Legs: Four leveling
- Shelves (Epoxy coated): 3 fixed, 5 adjustable
- Interior Lighting: none
- Insulation: Polyurethane foam
- Refrigerant: R404A CFC-Free
- Compressor: 1/3 hp
- Condenser: Hot Wall
- Thermostat: Adjustable, explosion proof
- Finish: White baked-on enamel
- Defrost: Manual with built in drain
- Electrical Requirements:
- 115 volts, 60 hertz, 1 phase
- Supply Plug: Not provided, conduit box provided
- Running Amps: 4.0
- Shipping weight: 360 lbs (167.8 kg)
- Warranty: (in US) initial 2 years on parts and labor, additional 3 years on compressor only (labor not included)
|
|
|
|
