    |
The Sys*Stim 206 is a one-channel neuromuscular stimulator that features four different waveforms in a light-weight package. The narrow pulse is suited for TENS while the wide and AC pulses can be used for muscle stimulation. Direct Current can be used to stimulate denervated muscles or perform iontophoresis. The Sys*Stim 206 is an ideal companion to the Sonicator 716 for combination therapy. If you are not a licensed practitioner, you MUST fax your prescription into 720-889-1596 (Att:Phys Rehab) in order for this item to ship. |
- LED displays indicate output intensity in peak volts or miliamps, and treatment time remaining.
- Treatment mode selections include four preset waveforms plus Surge and Reverse Polarity, enabling operator to choose the optimum waveform for each treatment and muscle group.
- Pulse frequency control permits user to vary the repetition of pulses applied to the patient from 1 to 83 pps, in all modes except Surge.
- Intensity control allows operator to vary output voltage to the patient during treatment.
- Go/Hold keys permit operator to start or suspend treatment with one touch.
- Timer entry selector sets treatment time from 1 to 29 minutes. Timer bypass initiates a continuous run.
|
- Output: 0 to 102 VDC
- Current: 30 mA max. DC continuous / 100 mA peak, all pulsed waveforms
- Frequency: 1-83 pps (Narrow, Wide and AC Pulses) / 83 Hz or 35 Hz in Surge mode
- Treatment time: 1-29 minutes
- Fuse: 1.0 Amp
- Size: 4.3 in (H) x 6 in (D) x 13.4 in (L)
- Weight: 5.6 lbs
- Warranty: 1 year
Note: This unit is a Class II Medical Device and by FDA regulations cannot be returned if it has been used. |
|
|
|
