     |
| If you are not a licensed practitioner, you MUST fax your prescription into 720-889-1596 (Att:Phys Rehab) in order for this item to ship.
The Metron Accusonic Plus therapeutic ultrasound now offers 1 and 3 MHz from the one detachable applicator.
Microprocessor technology has been used to make the Accusonic Plus compact and easy to use. This technology has allowed a number of useful features to be presented in the Accusonic Plus. |
- Up to 10 treatment programs can be stored in the Accusonic Plus, for quick and easy applications
- An LED bar graph is used to display the amount of ultrasound transmission occurring, this will assist the practitioner to monitor their own, or their staff’s technique and correctly deliver the prescribed amount of ultrasound
- The internal service software runs the calibration procedures, minimising the technician’s involvement
- Communicates with each transducer to correctly monitor and control frequency and contact sensing
|
- Ultrasound Output
- Frequency: 1.1 MHz +/- 10%
- Output power in
- 2.4 Watts/cm2 +/- 10% maximum continuous mode (Equivalent to 12 watts absolute for the 5 cm head)
- 1.5 Watts/cm2 +/- 10% maximum (Equivalent to 7.5 watts absolute for the 5 cm head)
- Frequency: 3.3 MHz +/- 10%
- Output power in: 3.0 Watts/cm2 +/- 10% maximum continuous mode (Equivalent to 3 watts absolute for the 1 cm head)
- Effective Radiating Area
- Nominally 0.8 square cms +/- 20% (1 cm head)
- Nominally 5.0 square cms +/- 20% (5 cm head)
- Power/intensity display: Accurate to +/- 20% of reading for output in excess of 0.2 Watt/cm2
- Beam Non-Uniformity Ratio: Nominally 5:1 +/- 20%
- Ultrasound Modulation Modulation modes: Continuous or pulsed
- Pulsed modulation
- Pulse frequency: 100 Hz +/- 2%
- Pulse period: 10 milliseconds +/- 2%
- Pulse width: 1.0, 2.0, 5.0 milliseconds +/- 2%
- Pulse duty cycle: 1:9 (10%), 1:4 (20%), 1:1 (50%) respectively +/- 2%
- Maximum Treatment Time: 30 minutes +/- 2%
- At time expiration: Time display shows zero and a two second audible alarm sounds
- Contact Display Function: Displays the degree of contact being made with the patient by the treatment applicator
- Contact Control Function: To detect poor acoustic coupling between ultrasonic treatment applicator and patient
- Dimensions (H x W x D): 4.8in x 10in x 10in
- Weight: 5.5 lbs
|
|
|
|
